Overview
You can manage your Spots remotely in Chargifi Cloud. There are a range of functions available for you to get an overview of how your Spots are doing and user action buttons to resolve any issues remotely.
Here is a list of detailed information you can see in the Manage app that will help you monitor your network closely:
Spot Details
| Details | Explanation |
|
Serial |
Gateway serial number assigned by the manufacturer. |
|
Model |
Model number assigned by the manufacturer. |
|
Firmware Version |
Reference for the level of firmware installed most recently onto the Gateway. |
|
Wi-Fi MAC Address |
MAC addresses are recognizable as six groups of two digits, separated by hyphens, colons, or no separator. Example: D8:C4:6A:56:E3:F8 These are assigned by the manufacturer to the units as a unique identifier. You will require them if you need to whitelist the Gateway during the installation. |
|
Ethernet MAC Address |
|
|
Bluetooth MAC Address |
Features
Possible User Actions
| Button | Explanation |
| Reboot |
Reboot the Spot if it was disconnected and switched back on again. |
| Calibrate |
Calibrate the Spot to enable Chargifi Cloud to get a base power reading for monitoring purposes. |
| Heartbeats |
View details on the heartbeats of the Spot to get insight into your network health. |
| Configure |
Configure the Spot remotely. |
| Identify |
Remotely trigger a buzzer so that a person on location can easily identify which Spot is being triggered. |
Comments
0 comments
Please sign in to leave a comment.